DA Car Profile

[Manu]

In an effort to get some non forum content up...I was wondering if you guys would want your car featured on DA's coming soon car section...

If so...

email me or post the following
* denotes required field

*DA Username
Name
Email Addy
Website
Other Contact Info (AIM, ICQ, etc)
*Make, Model, Trim, Year
Mods
Pics (not required, but preffered, I can scan pics snail mailed to me, and will evne mail em back if sent a SASE)
Track Times
Other Info/Comments

Thanks!

[Geoffrey]

sweeeet... I will post my specs when I get to work. But most of the info can be found on my site


oh, I did get my wife the Bullitt shifter, shifter ring, and door lock knobs for Christmas. Guess I need to update the site now

Geoffrey
geoffrey@krawdaddy . net
www.krawdaddy.net
ICQ 2325710
MSN gaskingw@hotmail . com

Use any pics you want from my site.

No track times,only GTeched my truck once, and I hit 15.49 @ 89ish (if I remember correctly)




ok, here we go

98 Dakota Regular Cab 5.2l (318) V8 Automatic tranny 3.55 gears w/ open diff

Mods:

Exterior

-Flowmaster dual outlet 2 chamber exhaust, with Mustang style exit (custom made)
-K&N Generation II clone, Po-Boy intake as it is know as on the DML
-Stockland fiberglass bed cover with carpet kit for the bed
-Factory roll pan AKA rear valance
-Lund wiper cowl
-Street Scenes upper and lower Speed Grilles
-Street Scenes Cal Vu manual mirrors
-Mopar fender flares
-Dakota R/T 17" rims and tires
-Clear corners on the front
-Painted taillights
-All factory stickers were changed from red to silver metallic

Interior

-White face gauges
-Kenwood KDC-MP8017 CD/MP3 player
-Kenwood 4042 EQ
-Kenwood 859 AMP (new 5 channel amp, runs it all!)
-Kenwood HQ 6.5 and 5.25 speakers KFC-HQR16 front
-Bazooka 8" Dual Voice Coil sub RS804DV
-Uniden Beartracker scanner
-Magellan GPS 330
-Nokia cell phone


2001 Mustang GT Mineral Grey Premium
-17" Torque Thrust D style wheels
-5 speed
-6 disc in dash Mach 460
-Charcoal Leather interior

mods

-Llumar window tint 50% side, 35% quarter's, 20% rear
-Flowmaster Delta Flow 40 series mufflers welded into place
-K&N air filter
-White face indiglo gauges (blue/green)
-Bullit style shifter knob, tanny ring, and door locks

[/edit]

that is about it

[Shadowhawk]

Yeah, i think it sound like a cool idea as well. I know I told Manu that via AIM, but thought I'd put my 2 cents here as well

[Nic]

Awesome! Here's my stuff!

Nic
Nicholas Bennett
sxestang@hotmail.com
http://www.tricitiesmustang.com
AIM: Nic92LXConv50
MSN: sxestang@hotmail.com
1989 Ford Mustang LX 5.0 Notch
Mods:
4 cylinder to 5.0 conversion - done by my father and I
Stock displacement 302
Trick Flow Twisted Wedge heads
Trick Flow Track Heat intake
Trick Flow Stage 1 cam
Trick Flow 1.6 roller rockers
Trick Flow hardened pushrods
FRPP roller lifters
Clevite77 bearings
Holcomb Motorsports Mass Air Flow conversion
C&L 76mm MAF
Mac 70mm throttle body
FRPP 24# injectors
Acufab adjustable fuel pressure regulator
Holley 190lph in tank fuel pump
TCI Streetfighter torque converter
TCI hardened input shaft
Centerline Convo Pro's 15x8.5" rear, 15x4" front
Griffin Aluminum Radiator
Stewart High Flow aluminum water pump
Lakewood 90/10 Struts, 50/50 shocks
Flowthech shorty headers
Bassani offroad X pipe
custom Magnaflow catback with dumps
K&N air filter
A9P computer
FRPP timing chain
Cusom electric fan setup
Pics (not required, but preffered, I can scan pics snail mailed to me, and will evne mail em back if sent a SASE)
Track Times
Other Info/Comments



Best time so far: 13.29 @ 106.66, shooting for 12.50's with some tuning, proper gearing, and a properly matched torque converter

President / Co-Founder, Tri Cities Mustang Club of Central Virginia
Moderator, Stangtec , SN95.com

[Wedge]

Wedge4876
Car's Name? 95 is Brenda (mine is Alan)
ASosebee@immucor.com
AIM: Wedge4876

-95 Black Mustang Gt. Coupe
-3.55 gear, OR H-pipe, Flowmaster catback 2-chambers, MAC shorty unequal headers, 70mm TB, 73mm Mass Air Meter, Cold Air Intake, Underdrive pulleys (and that's just performance mods)
-If you really want them I can find them
-Wrecked on August 25th, currently stripped.. got cervinis stalker body kit, and new interior pieces for christmas to put in.. my goal is to be done by summer

-65 Mustang Coupe
-Mexican 302 +.030, and too much to list..
-same as above
-runs 12s on street tires, and 75 shot of NOS.. haven't been to track since slicks and the 175 shot
-if you really want to know.. I will fill in the mods

[GroverDill]

email me or post the following
* denotes required field

*DA Username GroverDill
Name Joe
Email Addy GroverDill@home.com
Website nope
Other Contact Info (AIM, ICQ, etc) email please
*Make, Model, Trim, Year 1993 Mustang GT
Mods yeah a couple FMS 3.73 Rear Gears, Pro 5.0 Shifter, GTR Adjustable Clutch Quadrant, ASP Underdrive Pullies, Flex-A-Lite Elec. Fan, MAC Cat Back, Flamming Rivers Manual Rack Kit, D&D Tubular K-Member, D&D Tubular A-Arms, D&D Coil-Over Springs, Monroe GP Struts, Monroe GP Shocks, Stewart Hi Performance Water Pump, 180 Deg Thermostat, MM Camber Caster plates, Moroso Battery Box, Jegster Remote Battery shut off Switch, MM full length subframe connectors, MM PanHard bar, Stangnet LCAs, FMS Alum Driveshaft, Lakewood safety loop, MAC strut tower brace, MAC white face gauges, 01 GT leather seats, 01 GT power rack and switch, Walbro 255 lph fuel pump, Nitto Drag Radials, torque boxes seams welded,FRPP GT40 "Y" heads ported and gasket matched, FRPP port matched Cobra intake, FRPP 1.6 roller rockers, FRPP hardened pushrods, Ultradyne E2 cam 525 gross lift, Arp head bolts, FRPP 65 MM TB, C&L 76mm MAF, SVO 24# injectors, FRPP clutch, Billet flywheel, Kirban FRP w/ gauge, MAC windage tray, FRPP Lifters, Ceramic coated BBK long tubes and matching H-pipe, chrome oil pan(yeah i know), Optima red top battery

Pics (not required, but preffered, I can scan pics snail mailed to me, and will evne mail em back if sent a SASE)
Track Times Ugh none yet
Other Info/Comments Shes gettin there

[GroverDill]

[GroverDill]

ok im done

[Answerman]

can i post a car i used to have? it got sold due to some "speeding" tickets.... and what's with all the mustangs??

[keybrdcowboy]

Originally posted by Manu
In an effort to get some non forum content up...I was wondering if you guys would want your car featured on DA's coming soon car section...

If so...

email me or post the following
* denotes required field

*DA Username
Name
Email Addy
Website
Other Contact Info (AIM, ICQ, etc)
*Make, Model, Trim, Year
Mods
Pics (not required, but preffered, I can scan pics snail mailed to me, and will evne mail em back if sent a SASE)
Track Times
Other Info/Comments

Thanks!

1. keybrdcowboy
2. Josh Mobley
4. MSN Messenger - keybrdcowboy@hotmail.com
5. 1988 Saleen Mustang
6. Offroad H Pipe, Mac Dumps, and everything else Saleen does...
7. <img src="http://www2.coastalnet.com/~jjmobley/saleenleft.jpg"><p><p><img src="http://www2.coastalnet.com/~jjmobley/saleenrear.jpg"><p><p><img src="http://www2.coastalnet.com/~jjmobley/wheel.jpg"><p><p>
8. Ain't been to the track yet....

[cyberpunk]

im going out to take some pix of my car tomorow morning

hey can anyone touch up the pix for me? my digi cam isnt the greastest, and im not that good with photoshop

[tam]

I'm gonna be in on this too. I'm standing up for the little guy! Or cars at least

Info will follow

[Cannis.]

*DA Username --> Cannis.

Name --> Mark

Email Addy --> mark_cannis@yahoo.com

*Make, Model, Trim, Year --> Porsche, Boxster, Seal Gray, 2002

Mods --> Sport Package, B&M Short Shifter

Track Times --> Unofficial --> 0-60 in 6.0 seconds flat, max speed from stand to one mile 119 mph, quarter mile at 14.9 secs, max speed obtained 160 mph

Other Info/Comments --> will get some pics soon!...

[Pony Babe]

Originally posted by GroverDill
email me or post the following
* denotes required field

*DA Username GroverDill
Name Joe
Email Addy GroverDill@home.com
Website nope
Other Contact Info (AIM, ICQ, etc) email please
*Make, Model, Trim, Year 1993 Mustang GT
Mods yeah a couple FMS 3.73 Rear Gears, Pro 5.0 Shifter, GTR Adjustable Clutch Quadrant, ASP Underdrive Pullies, Flex-A-Lite Elec. Fan, MAC Cat Back, Flamming Rivers Manual Rack Kit, D&D Tubular K-Member, D&D Tubular A-Arms, D&D Coil-Over Springs, Monroe GP Struts, Monroe GP Shocks, Stewart Hi Performance Water Pump, 180 Deg Thermostat, MM Camber Caster plates, Moroso Battery Box, Jegster Remote Battery shut off Switch, MM full length subframe connectors, MM PanHard bar, Stangnet LCAs, FMS Alum Driveshaft, Lakewood safety loop, MAC strut tower brace, MAC white face gauges, 01 GT leather seats, 01 GT power rack and switch, Walbro 255 lph fuel pump, Nitto Drag Radials, torque boxes seams welded,FRPP GT40 "Y" heads ported and gasket matched, FRPP port matched Cobra intake, FRPP 1.6 roller rockers, FRPP hardened pushrods, Ultradyne E2 cam 525 gross lift, Arp head bolts, FRPP 65 MM TB, C&L 76mm MAF, SVO 24# injectors, FRPP clutch, Billet flywheel, Kirban FRP w/ gauge, MAC windage tray, FRPP Lifters, Ceramic coated BBK long tubes and matching H-pipe, chrome oil pan(yeah i know), Optima red top battery

Pics (not required, but preffered, I can scan pics snail mailed to me, and will evne mail em back if sent a SASE)
Track Times Ugh none yet
Other Info/Comments Shes gettin there

If if may say that is the first model Gt like urs I have seen and actually like.... Nice stang...love it..

[Pony Babe]

*DA Username ony Babe
Name ony Babe
Email Addy :bella1312000@yahoo.com
Website :http://95288400.home.icq.com/Life.html
Icq:95288400 Aim:Bella Ym:Bella1312000
*Make:Ford, Model:V6Mustang, Trim, Year 2000
Mods :Air Silencer* Removed, K&N Air Filter, 1 Kenwood KAC 628 Amp,Pioneer 2way Speakers )

Pics (not required, but preffered, I can scan pics snail mailed to me, and will evne mail em back if sent a SASE)
Track Times :dont race
Other Info/Comments :My stang is a big part of my life

[Šñøü†ê®]

Let's see if this works. I am trying to upload to Yahoo photos and linking.

http://photos.yahoo.com/jimdeecken/

I guess Yahoo blocks the link. Here is netsnapshot.



Wow, they shrunk the jpg down quite a bit. How did you guys get them not to shrink the pics?

[buggy]

Dang, I really wanted to do this when I had pictures, and the car was more 'done', but I couldn't resist!

DA Username: buggy

Name: Cristina

email: buggy@io.com

Website: www.pomofo.com *Husband's site, need to add my own section

AIM: violetstain

Make, Model, Trim, Year - 1991 Ford Mustang Coupe (originally a 4CYL)

Mods: GT40 heads, Explorer intake, 4.10 gears, Shorty Headers, PI Stallion 2800 Stall Converner, 31 spline axles/31 spline traction lock, Motor Sport Disc brake kit, 42# FMS Injectors, Vortech S Trim, AutoLogic chip, More to come.

[DJ NoDoz]

NoDoz
Name: Ruben A. Fortes Jr.
Email Addy:R_Fortes@msn.com
Website:working on it
Other Contact Info (AIM, ICQ, etc)
Make: chevy
Model: impala
Trim: stock
Year: 1965
Mods: ok, here we go, 1985 chevy 350cdi, edelbrock aluminium intake, edelbrock 750 carb, stock cam(engine was from a blazer), polished and ported heads, hooker headers, cherry bomb mufflers, cragar spoke rims
Pics: n/a
Track Times:
Other Info/Comments: May she rest in peace,(sold her to get my buick boatail) one month later she went up in flames.........****sob****....engine fire

Make: buick
Model: riviera
Trim: stock
Year: 1971
Mods: saving cash for major engine work, but so far I have, sony cd, infinity 6x9s, jbl 10s, kenwood eq, optimus amp for 6x9 40 watts, optimus amp for 10s 100 watts, just trying to get her up to snuff now

[Outlaw5.0]

I want in too!!!

Outlaw5.0
Chris Parslow
Chris Parslow's 1993 Mustang GT
ICQ-63472138
1993 Mustang GT

Repaint - Ford royal metallic blue (with a few tweeks)
1993 SVT Cobra / 1986 SVO Taillights
1993 SVT Cobra Hatch & Fender Emblems
5.0. Cobra H.O. Intake Manifold Plate
Clear Corner Lenses
American Racing 16" Polished Aluminum Wheels
BF Goodrich Comp TA VR Tires (245/45 16)
March "Ram Air" Cold Air Induction
Eclipse Cd Player and JL Pro-Audio speakers
US Acoustics 2150 Amp (450Wx1)
Alpine 12" Type S subwoofer
Window Tint (23% Doors/7% Rears)
9mm Ford Motorsport plug wires

Coming Soon

3.73 FMS gears
headers, xpipe

[sawbones25]

Sawbones25
Dave
sawbones25@hotmail.com
sawbones25 on MSN and Yahoo

1989 Mustang GT convertible
Flex-a-lite fan
ported heads
BBK 1 5/8" shorty headers
1.7 Roller rockers from a 93 Cobra
Steeda Tri-Ax shifter
FMS HD clutch
FMS 9mm wires
Summit aluminum adjustable clutch quadrant and cable
MSD coil
And a few other things I can't remember right now.

I have some pictures available but they are all of the car up on jackstands and torn apart. I should have the car back together within the next month so I'll take some more then.